channel 02
The Radio
A walkie-talkie that speaks Morse. Open this page on two devices, pick the same channel, and talk — messages travel as sound and decode live on the other side. Audio never leaves your devices.
signal
~15 WPMband
normal · 600 Hz — everyone can hear it
environment
sets squelch + volume for the room
partner
sends a link that opens pre-tuned to your exact settings
?
The tone's pitch. Both walkies must match — easiest via the band buttons above.?
Noise gate: signals must beat the amber tick on the meter to count. Raise it in noisy rooms, lower it for faint senders.best results: devices within 2 m · same channel · 10–25 WPM · no Bluetooth speakers · whisper channel is near-silent to adults
How to talk between two devices
- 01 — Open morsecodeverse.com/radio/ on both devices.
- 02 — Easiest: hit Invite to this channel and open the link on the second device — it arrives pre-tuned. Or pick the same band + environment manually.
- 03 — Press Power on and allow the microphone on both.
- 04 — Type, hit PTT, and watch it appear on the other screen. Reply with R · roger.
The radio is half-duplex like a real walkie-talkie: it mutes its own ears while transmitting, then goes back to listening. The receiver locks onto the sender's speed automatically. Just need to convert text without the two-way parts? Use the plain translator.